Network Working Group A. Clemm Internet-Draft J. Medved Intended status: Standards Track Cisco Expires: February 11, 2017 R. Varga Pantheon Technologies SRO T. Tkacik X. Liu Ericsson I. Bryskin Huawei A. Guo Adva Optical H. Ananthakrishnan Packet Design N. Bahadur Bracket Computing V. Beeram Juniper Networks August 10, 2016 A YANG Data Model for Layer 3 Topologies draft-ietf-i2rs-yang-l3-topology-03.txt Abstract This document defines a YANG data model for layer 3 network topologies. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on February 11, 2017. Clemm, et al. Expires February 11, 2017 [Page 1] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 Copyright Notice Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Definitions and Acronyms . . . . . . . . . . . . . . . . . . 4 3. Model Structure . . . . . . . . . . . . . . . . . . . . . . . 4 4. Layer 3 Unicast Topology Model Overview . . . . . . . . . . . 5 5. Layer 3 Unicast Topology YANG Module . . . . . . . . . . . . 7 6. Extending the Model . . . . . . . . . . . . . . . . . . . . . 14 6.1. Example 1: OSPF Topology . . . . . . . . . . . . . . . . 14 6.1.1. Model Overview . . . . . . . . . . . . . . . . . . . 15 6.1.2. OSPF Topology YANG Module . . . . . . . . . . . . . . 17 6.2. Example 2: IS-IS Topology . . . . . . . . . . . . . . . . 22 6.2.1. Model Overview . . . . . . . . . . . . . . . . . . . 22 6.2.2. IS-IS Topology YANG Module . . . . . . . . . . . . . 23 7. Security Considerations . . . . . . . . . . . . . . . . . . . 28 8. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 28 9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 28 10. References . . . . . . . . . . . . . . . . . . . . . . . . . 29 10.1. Normative References . . . . . . . . . . . . . . . . . . 29 10.2. Informative References . . . . . . . . . . . . . . . . . 29 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 30 Clemm, et al. Expires February 11, 2017 [Page 2] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 1. Introduction This document introduces a YANG [RFC6020] [RFC6991] [I-D.draft-ietf-netmod-rfc6020bis] data model for Layer 3 network topologies, specifically Layer 3 Unicast. The model allows an application to have a holistic view of the topology of a Layer 3 network, all contained in a single conceptual YANG datastore. The data model builds on top of, and augments, the data model for network topologies defined in [I-D.draft-ietf-i2rs-yang-network-topo]. An earlier revision of that Internet Draft contained not just the general model for network topologies, but also the model for layer 3 network topologies that is being specified here. However, we decided to "split" the earlier draft to separate the truly general aspects of a topology data model, which apply to any type of topology, from the application of this model to a particular domain, here: a Layer 3 network. The document also shows how the model can be further refined to cover different Layer 3 Unicast topology types. For this purpose, example models are introduced that cover IS-IS [RFC1195] and OSPF [RFC2178]. Those examples are intended purely for illustrative purposes; we expect that full-blown IS-IS and OSPF models will be more comprehensive and refined than the examples shown here. There are multiple applications for a topology data model. A number of use cases have been defined in section 6 of [I-D.draft-ietf-i2rs-usecase-reqs-summary]. For example, nodes within the network can use the data model to capture their understanding of the overall network topology and expose it to a network controller. A network controller can then use the instantiated topology data to compare and reconcile its own view of the network topology with that of the network elements that it controls. Alternatively, nodes within the network could propagate this understanding to compare and reconcile this understanding either amongst themselves or with help of a controller. Beyond the network element itself, a network controller might even use the data model to represent its view of the topology that it controls and expose it to applications north of itself. There are several reasons to choose YANG to define the data model. Data defined using YANG can be exposed by a server to client applications and controllers via Netconf [RFC6241]. The fact that YANG can potentially be used with different protocols and interfaces provides for a degree of "future-proofing" of model implementations. Also, YANG can serve as the basis for model-driven toolchains, such as used in the Open Daylight project [OpenDaylight]. Clemm, et al. Expires February 11, 2017 [Page 3] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 The data model for Layer 3 Unicast topologies defined in this document is specified in a YANG module "ietf-l3-unicast-topology". To do so, it augments general network topology model defined in [I-D.draft-ietf-i2rs-yang-network-topo] with information specific to Layer 3 Unicast. This way, the general topology model is extended to be able to meet the needs of Layer 3 Unicast topologies. Information that is kept in the Traffic Engineering Database (TED) is specified in a separate model and outside the scope of this specification. 2. Definitions and Acronyms Datastore: A conceptual store of instantiated management information, with individual data items represented by data nodes which are arranged in hierarchical manner. Data subtree: An instantiated data node and the data nodes that are hierarchically contained within it. HTTP: Hyper-Text Transfer Protocol IGP: Interior Gateway Protocol IS-IS: Intermediate System to Intermediate System protocol LSP: Label Switched Path NETCONF: Network Configuration Protocol OSPF: Open Shortest Path First, a link state routing protocol URI: Uniform Resource Identifier ReST: Representational State Transfer, a style of stateless interface and protocol that is generally carried over HTTP SRLG: Shared Risk Link Group TED: Traffic Engineering Database YANG: A data definition language for NETCONF 3. Model Structure The Layer 3 Unicast topology model is defined by YANG module "l3- unicast-topology". The relationship of this module with other YANG modules is roughly depicted in the figure below. Clemm, et al. Expires February 11, 2017 [Page 4] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 +-----------------------------+ | +-----------------------+ | | | ietf-network | | | +----------^------------+ | | | | | +-----------------------+ | | | ietf-network-topology | | | +----------+------------+ | +-------------^---------------+ | | +-----------^-------------+ | L3-UNICAST-TOPOLOGY | +----+---------------+----+ ^ ^ | | | | +--------^-----+ +-----^---------+ | ospf-topology| | isis-topology | +--------------+ +---------------+ Figure 1: Overall model structure YANG modules "ietf-network" and "ietf-network-topology" collectively define the basic network topology model. YANG module "ietf-l3- unicast-topology" augments those models with additional definitions needed to represent Layer 3 Unicast topologies. This module in turn can be augmented by YANG modules with additional definitions for specific types of Layer 3 Unicast topologies, such as OSPF and for IS-IS topologies. 4. Layer 3 Unicast Topology Model Overview The Layer 3 Unicast topology model is defined by YANG module "ietf- l3-unicast-topology" and depicted in the following diagram. Brackets enclose list keys, "rw" means configuration, "ro" operational state data, "?" designates optional nodes, "*" designates nodes that can have multiple instances. Parantheses enclose choice and case nodes. The prefix "nd:" refers to the YANG module for networks; the prefix "lnk:" refers to the YANG module for network topology. In the interest of brevity, notifications are not depicted. Clemm, et al. Expires February 11, 2017 [Page 5] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 module: ietf-l3-unicast-topology augment /nd:networks/nd:network/nd:network-types: +--rw l3-unicast-topology! augment /nd:networks/nd:network: +--rw l3-topology-attributes +--rw name? string +--rw flag* l3-flag-type augment /nd:networks/nd:network/nd:node: +--rw l3-node-attributes +--rw name? inet:domain-name +--rw flag* node-flag-type +--rw router-id* inet:ip-address +--rw prefix* [prefix] +--rw prefix inet:ip-prefix +--rw metric? uint32 +--rw flag* prefix-flag-type augment /nd:networks/nd:network/lnk:link: +--rw l3-link-attributes +--rw name? string +--rw flag* link-flag-type +--rw metric? uint32 augment /nd:networks/nd:network/nd:node/lnk:termination-point: +--rw l3-termination-point-attributes +--rw (termination-point-type)? +--:(ip) | +--rw ip-address* inet:ip-address +--:(unnumbered) +--rw unnumbered-id? uint32 The module augments the original ietf-network and ietf-network- topology modules as follows: o A new network topology type is introduced, l3-unicast-topology. The corresponding container augments the network-types of the ietf-network module. o Additional topology attributes are introduced, defined in a grouping, which augments the "network" list of the network module. The attributes include a name for the topology, as well as a set of flags (represented through a leaf-list). Each type of flag is represented by a separate identity. This allows to introduce additional flags in augmenting modules using additional identities without needing to revise this module. o Additional data objects for nodes are introduced by augmenting the "node" list of the network module. New objects include again a set of flags, as well as a list of prefixes. Each prefix in turn Clemm, et al. Expires February 11, 2017 [Page 6] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 includes an ip prefix, a metric, and a prefix-specific set of flags. o Links (in the ietf-network-topology module) are augmented with a set of parameters as well, allowing to associate a link with a link name, another set of flags, and a link metric. o Termination points (in the ietf-network-topology module as well) are augmented with a choice of IP address or identifier. In addition, the module defines a set of notifications to alert clients of any events concerning links, nodes, prefixes, and termination points. Each notification includes an indication of the type of event, the topology from which it originated, and the affected node, or link, or prefix, or termination point. In addition, as a convenience to applications, additional data of the affected node, or link, or termination point (respectively) is included. While this makes notifications larger in volume than they would need to be, it avoids the need for subsequent retrieval of context information, which also might have changed in the meantime. 5. Layer 3 Unicast Topology YANG Module file "ietf-l3-unicast-topology@2016-08-10.yang" module ietf-l3-unicast-topology { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-l3-unicast-topology"; prefix "l3t"; import ietf-network { prefix "nd"; } import ietf-network-topology { prefix "lnk"; } import ietf-inet-types { prefix "inet"; } organization "IETF I2RS (Interface to the Routing System) Working Group"; contact "WG Web: WG List: WG Chair: Susan Hares WG Chair: Russ White Editor: Alexander Clemm Clemm, et al. Expires February 11, 2017 [Page 7] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 Editor: Jan Medved Editor: Robert Varga Editor: Tony Tkacik Editor: Xufeng Liu Editor: Igor Bryskin Editor: Aihua Guo Editor: Nitin Bahadur Editor: Hariharan Ananthakrishnan Editor: Vishnu Pavan Beeram "; description "This module defines a model for Layer 3 Unicast topologies. Copyright (c) 2016 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of draft-ietf-i2rs-yang-network-topo-03; see the RFC itself for full legal notices. NOTE TO RFC EDITOR: Please replace above reference to draft-ietf-i2rs-yang-network-topo-03 with RFC number when published (i.e. RFC xxxx)."; revision "2016-08-10" { description "Initial revision. NOTE TO RFC EDITOR: Please replace the following reference to draft-ietf-i2rs-yang-l3-topology-03 with RFC number when published (i.e. RFC xxxx)."; reference "draft-ietf-i2rs-yang-l3-topology-03"; } identity flag-identity { description "Base type for flags"; Clemm, et al. Expires February 11, 2017 [Page 8] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 } typedef l3-event-type { type enumeration { enum "add" { description "An Layer 3 node or link or prefix or termination-point has been added"; } enum "remove" { description "An Layer 3 node or link or prefix or termination-point has been removed"; } enum "update" { description "An Layer 3 node or link or prefix or termination-point has been updated"; } } description "Layer 3 Event type for notifications"; } typedef prefix-flag-type { type identityref { base "flag-identity"; } description "Prefix flag attributes"; } typedef node-flag-type { type identityref { base "flag-identity"; } description "Node flag attributes"; } typedef link-flag-type { type identityref { base "flag-identity"; } description "Prefix flag attributes"; } typedef l3-flag-type { type identityref { base "flag-identity"; } Clemm, et al. Expires February 11, 2017 [Page 9] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 description "L3 flag attributes"; } grouping l3-prefix-attributes { description "L3 prefix attributes"; leaf prefix { type inet:ip-prefix; description "IP prefix value"; } leaf metric { type uint32; description "Prefix metric"; } leaf-list flag { type prefix-flag-type; description "Prefix flags"; } } grouping l3-unicast-topology-type { description "Identify the topology type to be L3 unicast."; container l3-unicast-topology { presence "indicates L3 Unicast Topology"; description "The presence of the container node indicates L3 Unicast Topology"; } } grouping l3-topology-attributes { description "Topology scope attributes"; container l3-topology-attributes { description "Containing topology attributes"; leaf name { type string; description "Name of the topology"; } leaf-list flag { type l3-flag-type; description "Topology flags"; } } } grouping l3-node-attributes { Clemm, et al. Expires February 11, 2017 [Page 10] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 description "L3 node scope attributes"; container l3-node-attributes { description "Containing node attributes"; leaf name { type inet:domain-name; description "Node name"; } leaf-list flag { type node-flag-type; description "Node flags"; } leaf-list router-id { type inet:ip-address; description "Router-id for the node"; } list prefix { key "prefix"; description "A list of prefixes along with their attributes"; uses l3-prefix-attributes; } } } grouping l3-link-attributes { description "L3 link scope attributes"; container l3-link-attributes { description "Containing link attributes"; leaf name { type string; description "Link Name"; } leaf-list flag { type link-flag-type; description "Link flags"; } leaf metric { type uint32; description "Link Metric"; } Clemm, et al. Expires February 11, 2017 [Page 11] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 } } grouping l3-termination-point-attributes { description "L3 termination point scope attributes"; container l3-termination-point-attributes { description "Containing termination point attributes"; choice termination-point-type { description "Indicates the termination point type"; case ip { leaf-list ip-address { type inet:ip-address; description "IPv4 or IPv6 address"; } } case unnumbered { leaf unnumbered-id { type uint32; description "Unnumbered interface identifier"; } } } } } augment "/nd:networks/nd:network/nd:network-types" { description "Introduce new network type for L3 unicast topology"; uses l3-unicast-topology-type; } augment "/nd:networks/nd:network" { when "nd:network-types/l3-unicast-topology" { description "Augmentation parameters apply only for networks with L3 unicast topology"; } description "L3 unicast for the network as a whole"; uses l3-topology-attributes; } augment "/nd:networks/nd:network/nd:node" { when "../nd:network-types/l3-unicast-topology" { description "Augmentation parameters apply only for networks with L3 unicast topology"; } Clemm, et al. Expires February 11, 2017 [Page 12] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 description "L3 unicast node level attributes "; uses l3-node-attributes; } augment "/nd:networks/nd:network/lnk:link" { when "../nd:network-types/l3-unicast-topology" { description "Augmentation parameters apply only for networks with L3 unicast topology"; } description "Augment topology link attributes"; uses l3-link-attributes; } augment "/nd:networks/nd:network/nd:node/" +"lnk:termination-point" { when "../../nd:network-types/l3-unicast-topology" { description "Augmentation parameters apply only for networks with L3 unicast topology"; } description "Augment topology termination point configuration"; uses l3-termination-point-attributes; } notification l3-node-event { description "Notification event for L3 node"; leaf l3-event-type { type l3-event-type; description "Event type"; } uses nd:node-ref; uses l3-unicast-topology-type; uses l3-node-attributes; } notification l3-link-event { description "Notification event for L3 link"; leaf l3-event-type { type l3-event-type; description "Event type"; } uses lnk:link-ref; uses l3-unicast-topology-type; uses l3-link-attributes; } Clemm, et al. Expires February 11, 2017 [Page 13] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 notification l3-prefix-event { description "Notification event for L3 prefix"; leaf l3-event-type { type l3-event-type; description "Event type"; } uses nd:node-ref; uses l3-unicast-topology-type; container prefix { description "Containing L3 prefix attributes"; uses l3-prefix-attributes; } } notification termination-point-event { description "Notification event for L3 termination point"; leaf l3-event-type { type l3-event-type; description "Event type"; } uses lnk:tp-ref; uses l3-unicast-topology-type; uses l3-termination-point-attributes; } } 6. Extending the Model The model can be extended for specific Layer 3 Unicast types. Examples include OSPF and IS-IS topologies. In the following, two additional YANG modules are introduced that define simple topology models for OSPF and IS-IS, respectively. These modules intended to serve as examples that illustrate how the general topology model can be refined across multiple levels; they do not constitute full- fledged OSPF and IS-IS topology models which may be more comprehensive and refined than the models that are described here. 6.1. Example 1: OSPF Topology Clemm, et al. Expires February 11, 2017 [Page 14] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 6.1.1. Model Overview The following model shows how the Layer 3 Unicast topology model can be extended to cover OSFP topologies. For this purpose, a set of augmentations are introduced in a separate YANG module, "ietf-ospf- topology", whose structure is depicted in the following diagram. Like before, brackets enclose list keys, "rw" means configuration, "ro" operational state data, "?" designates optional nodes, "*" designates nodes that can have multiple instances. Parantheses enclose choice and case nodes. A "+" at the end of a line indicates a line break. Clemm, et al. Expires February 11, 2017 [Page 15] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 module: ietf-ospf-topology augment /nd:networks/nd:network/nd:network-types/l3t:l3-unicast-topology: +--rw ospf! augment /nd:networks/nd:network/l3t:l3-topology-attributes: +--rw ospf-topology-attributes +--rw area-id? area-id-type augment /nd:networks/nd:network/nd:node/l3t:l3-node-attributes: +--rw ospf-node-attributes +--rw (router-type)? | +--:(abr) | | +--rw abr? empty | +--:(asbr) | | +--rw asbr? empty | +--:(internal) | | +--rw internal? empty | +--:(pseudonode) | +--rw pseudonode? empty +--rw dr-interface-id? uint32 +--rw multi-topology-id* uint8 augment /nd:networks/nd:network/lnk:link/l3t:l3-link-attributes: +--rw ospf-link-attributes +--rw multi-topology-id? uint8 augment /l3t:l3-node-event: +---- ospf! +---- ospf-node-attributes +---- (router-type)? | +--:(abr) | | +---- abr? empty | +--:(asbr) | | +---- asbr? empty | +--:(internal) | | +---- internal? empty | +--:(pseudonode) | +---- pseudonode? empty +---- dr-interface-id? uint32 +---- multi-topology-id* uint8 augment /l3t:l3-link-event: +---- ospf! +---- ospf-link-attributes +---- multi-topology-id? uint8 The module augments "ietf-l3-unicast-topology" as follows: o A new topology type for an OSPF topology is introduced. o Additional topology attributes are defined in a new grouping which augments l3-topology-attributes of the ietf-l3-unicast-topology Clemm, et al. Expires February 11, 2017 [Page 16] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 module. The attributes include an OSPF area-id identifying the OSPF area. o Additional data objects for nodes are introduced by augmenting the l3-node-attributes of the l3-unicast-topology module. New objects include router-type, dr-interface-id for pseudonodes, list of multi-topology-ids, ospf node capabilities, and traffic engineering attributes. o Links are augmented with a multi-topology-id and traffic engineering link attributes. o Prefixes are augmented with OSPF specific forwarding address. In addition, the module extends notifications for events concerning Layer 3 nodes, links, termination points, and prefixes with OSPF attributes. It should be noted that the model defined here represents topology and is intended as an example. It does not define how to configure OSPF routers or interfaces. 6.1.2. OSPF Topology YANG Module file "ietf-ospf-topology@2016-08-10.yang" module ietf-ospf-topology { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-ospf-topology"; prefix "ospft"; import ietf-yang-types { prefix "yang"; } import ietf-network { prefix "nd"; } import ietf-network-topology { prefix "lnk"; } import ietf-l3-unicast-topology { prefix "l3t"; } organization "IETF I2RS (Interface to the Routing System) Working Group"; contact "WG Web: <>http://tools.ietf.org/wg/i2rs/> WG List: WG Chair: Susan Hares Clemm, et al. Expires February 11, 2017 [Page 17] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 WG Chair: Russ White Editor: Alexander Clemm Editor: Jan Medved Editor: Robert Varga Editor: Tony Tkacik Editor: Xufeng Liu Editor: Igor Bryskin Editor: Aihua Guo Editor: Nitin Bahadur Editor: Hariharan Ananthakrishnan Editor: Vishnu Pavan Beeram "; description "This module defines a model for OSPF network topologies. Copyright (c) 2016 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of draft-ietf-i2rs-yang-network-topo-03; see the RFC itself for full legal notices. NOTE TO RFC EDITOR: Please replace above reference to draft-ietf-i2rs-yang-network-topo-03 with RFC number when published (i.e. RFC xxxx)."; revision "2016-08-10" { description "Initial revision. NOTE TO RFC EDITOR: Please replace the following reference to draft-ietf-i2rs-yang-l3-topology-03 with RFC number when published (i.e. RFC xxxx)."; reference "draft-ietf-i2rs-yang-l3-topology-03"; } typedef area-id-type { Clemm, et al. Expires February 11, 2017 [Page 18] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 type yang:dotted-quad; description "Area ID type."; } grouping ospf-topology-type { description "Identifies the OSPF topology type."; container ospf { presence "indiates OSPF Topology"; description "Its presence identifies the OSPF topology type."; } } augment "/nd:networks/nd:network/nd:network-types/" + "l3t:l3-unicast-topology" { description "Defines the OSPF topology type."; uses ospf-topology-type; } augment "/nd:networks/nd:network/l3t:l3-topology-attributes" { when "../nd:network-types/l3t:l3-unicast-topology/ospf" { description "Augment only for OSPF topology"; } description "Augment topology configuration"; container ospf-topology-attributes { description "Containing topology attributes"; leaf area-id { type area-id-type; description "OSPF area ID"; } } } augment "/nd:networks/nd:network/nd:node/l3t:l3-node-attributes" { when "../../nd:network-types/l3t:l3-unicast-topology/ospf" { description "Augment only for OSPF topology"; } description "Augment node configuration"; uses ospf-node-attributes; } augment "/nd:networks/nd:network/lnk:link/l3t:l3-link-attributes" { when "../../nd:network-types/l3t:l3-unicast-topology/ospf" { description Clemm, et al. Expires February 11, 2017 [Page 19] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 "Augment only for OSPF topology"; } description "Augment link configuration"; uses ospf-link-attributes; } grouping ospf-node-attributes { description "OSPF node scope attributes"; container ospf-node-attributes { description "Containing node attributes"; choice router-type { description "Indicates router type"; case abr { leaf abr { type empty; description "The node is ABR"; } } case asbr { leaf asbr { type empty; description "The node is ASBR"; } } case internal { leaf internal { type empty; description "The node is internal"; } } case pseudonode { leaf pseudonode { type empty; description "The node is pseudonode"; } } } leaf dr-interface-id { when "../router-type/pseudonode" { description "Valid only for pseudonode"; Clemm, et al. Expires February 11, 2017 [Page 20] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 } type uint32; default "0"; description "For pseudonodes, DR interface-id"; } leaf-list multi-topology-id { type uint8 { range "0..127"; } max-elements "128"; description "List of Multi-Topology Identifier up-to 128 (0-127). See RFC 4915"; } } } grouping ospf-link-attributes { description "OSPF link scope attributes"; container ospf-link-attributes { description "Containing OSPF link attributes"; leaf multi-topology-id { type uint8 { range "0..127"; } description "Multi topology ID"; } } } // ospf-link-attributes augment "/l3t:l3-node-event" { description "OSPF node event"; uses ospf-topology-type; uses ospft:ospf-node-attributes; } augment "/l3t:l3-link-event" { description "OSPF link event"; uses ospf-topology-type; uses ospft:ospf-link-attributes; } } Clemm, et al. Expires February 11, 2017 [Page 21] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 6.2. Example 2: IS-IS Topology 6.2.1. Model Overview IS-IS topologies are another type of Layer 3 Unicast topology. Like in the case of OSPF topology, a model for IS-IS topology can be defined in a separate module which augments "ietf-l3-unicast-igp- topology". The structure of a corresponding model, "ietf-isis- topology", is depicted in the following diagram. Like before, brackets enclose list keys, "rw" means configuration, "ro" operational state data, "?" designates optional nodes, "*" designates nodes that can have multiple instances. Parantheses enclose choice and case nodes. A "+" at the end of a line indicates a line break. module: ietf-isis-topology augment /nd:networks/nd:network/nd:network-types/l3t:l3-unicast-topology: +--rw isis! augment /nd:networks/nd:network/l3t:l3-topology-attributes: +--rw isis-topology-attributes +--rw net? area-address augment /nd:networks/nd:network/nd:node/l3t:l3-node-attributes: +--rw isis-node-attributes +--rw iso | +--rw iso-system-id? system-id | +--rw iso-pseudonode-id? iso-pseudonode-id +--rw net* area-address +--rw multi-topology-id* uint16 +--rw level? level augment /nd:networks/nd:network/lnk:link/l3t:l3-link-attributes: +--rw isis-link-attributes +--rw multi-topology-id? uint16 augment /l3t:l3-node-event: +---- isis! +---- isis-node-attributes +---- iso | +---- iso-system-id? system-id | +---- iso-pseudonode-id? iso-pseudonode-id +---- net* area-address +---- multi-topology-id* uint16 +---- level? level augment /l3t:l3-link-event: +---- isis! +---- isis-link-attributes +---- multi-topology-id? uint16 The module augments the ietf-l3-unicast-topology as follows: Clemm, et al. Expires February 11, 2017 [Page 22] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 o A new topology type is introduced for isis. o Additional topology attributes are introduced in a new grouping which augments "topology-attributes" of the ietf-l3-unicast- topology module. The attributes include an ISIS NET-id identifying the area. o Additional data objects for nodes are introduced by augmenting "node-attributes" of the ietf-l3-unicast-topology module. New objects include router-type, iso-system-id to identify the router, a list of multi-topology-id, a list of NET ids, and traffic engineering attributes. o Links are augmented with multi-topology-id and traffic engineering link attributes. In addition, the module augments nodes and links with IS-IS attributes. Again, it should be noted that the model defined here represents topology and is intended as an example. It does not define how to configure IS-IS routers or interfaces. 6.2.2. IS-IS Topology YANG Module file "ietf-isis-topology@2016-08-10.yang" module ietf-isis-topology { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-isis-topology"; prefix "isist"; import ietf-network { prefix "nd"; } import ietf-network-topology { prefix "lnk"; } import ietf-l3-unicast-topology { prefix "l3t"; } organization "IETF I2RS (Interface to the Routing System) Working Group"; contact "WG Web: > WG List: WG Chair: Susan Hares WG Chair: Russ White Clemm, et al. Expires February 11, 2017 [Page 23] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 Editor: Alexander Clemm Editor: Jan Medved Editor: Robert Varga Editor: Tony Tkacik Editor: Xufeng Liu Editor: Igor Bryskin Editor: Aihua Guo Editor: Nitin Bahadur Editor: Hariharan Ananthakrishnan Editor: Vishnu Pavan Beeram "; description "This module defines a model for IS-IS network topologies. Copyright (c) 2016 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of draft-ietf-i2rs-yang-network-topo-03; see the RFC itself for full legal notices. NOTE TO RFC EDITOR: Please replace above reference to draft-ietf-i2rs-yang-network-topo-03 with RFC number when published (i.e. RFC xxxx)."; revision "2016-08-10" { description "Initial revision. NOTE TO RFC EDITOR: Please replace the following reference to draft-ietf-i2rs-yang-l3-topology-03 with RFC number when published (i.e. RFC xxxx)."; reference draft-ietf-i2rs-yang-l3-topology-03; } typedef iso-pseudonode-id { type string { pattern '[0-9a-fA-F]{2}'; Clemm, et al. Expires February 11, 2017 [Page 24] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 } description "ISO pseudonode id for broadcast network."; } typedef area-address{ type string { pattern '[0-9A-Fa-f]{2}\.([0-9A-Fa-f]{4}\.){0,3}'; } description "This type defines the area address."; } typedef system-id { type string { pattern '[0-9A-Fa-f]{4}\.[0-9A-Fa-f]{4}\.[0-9A-Fa-f]{4}'; } description "This type defines ISIS system id using a pattern; an example of a system id looks like: 0143.0438.AeF0."; } typedef level { type enumeration { enum "level-1" { description "This enum describes L1 only capability."; } enum "level-2" { description "This enum describes L2 only capability."; } enum "level-all" { description "This enum describes both levels (L1 and L2) capability."; } } default "level-all"; description "This type defines the ISIS level of an object."; } grouping isis-topology-type { description "Identifies the ISIS topology type."; container isis { presence "Indicates ISIS Topology"; description "Its presence identifies the ISIS topology type."; } } Clemm, et al. Expires February 11, 2017 [Page 25] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 augment "/nd:networks/nd:network/nd:network-types/" +"l3t:l3-unicast-topology" { description "Defines the ISIS topology type."; uses isis-topology-type; } augment "/nd:networks/nd:network/l3t:l3-topology-attributes" { when "../nd:network-types/l3t:l3-unicast-topology/isis" { description "Augment only for ISIS topology"; } description "Augment topology configuration"; container isis-topology-attributes { description "Containing topology attributes"; leaf net { type area-address; description "ISO NET ID value"; } } } augment "/nd:networks/nd:network/nd:node/"+ "l3t:l3-node-attributes" { when "../../nd:network-types/l3t:l3-unicast-topology/isis" { description "Augment only for ISIS topology"; } description "Augment node configuration"; uses isis-node-attributes; } augment "/nd:networks/nd:network/lnk:link/l3t:l3-link-attributes" { when "../../nd:network-types/l3t:l3-unicast-topology/isis" { description "Augment only for ISIS topology"; } description "Augment link configuration"; uses isis-link-attributes; } grouping isis-node-attributes { description "ISIS node scope attributes"; container isis-node-attributes { description "Containing node attributes"; Clemm, et al. Expires February 11, 2017 [Page 26] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 container iso { description "Containing ISO atrributes"; leaf iso-system-id { type system-id; description "ISO system ID"; } leaf iso-pseudonode-id { type iso-pseudonode-id; default "00"; description "Pseudonode ID"; } } leaf-list net { type area-address; max-elements 3; description "List of ISO NET IDs"; } leaf-list multi-topology-id { type uint16 { range "0..4095"; } max-elements "128"; description "List of Multi Topology Identifier up to 128 (0-127). RFC 4915"; } leaf level { type level; description "Level 1, Level 2 or Level 1 and 2"; } } } grouping isis-link-attributes { description "ISIS link scope attributes"; container isis-link-attributes { description "Containing link attributes"; leaf multi-topology-id { type uint16 { range "0..4095"; } description "Multi topology ID"; Clemm, et al. Expires February 11, 2017 [Page 27] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 } } } augment "/l3t:l3-node-event" { description "ISIS node event"; uses isis-topology-type; uses isis-node-attributes; } augment "/l3t:l3-link-event" { description "ISIS link event"; uses isis-topology-type; uses isis-link-attributes; } } 7. Security Considerations The transport protocol used for sending the topology data MUST support authentication and SHOULD support encryption. The data-model by itself does not create any security implications. 8. Contributors The model presented in this paper was contributed to by more people than can be listed on the author list. Additional contributors include: o Ken Gray, Juniper Networks o Tom Nadeau, Brocade o Aleksandr Zhdankin, Cisco 9. Acknowledgements We wish to acknowledge the helpful contributions, comments, and suggestions that were received from Ladislav Lhotka, Andy Bierman, Carlos Pignataro, Joel Halpern, Juergen Schoenwaelder, Alia Atlas, Susan Hares, Benoit Claise, and Carl Moberg. Clemm, et al. Expires February 11, 2017 [Page 28] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 10. References 10.1. Normative References [I-D.draft-ietf-i2rs-yang-network-topo] Clemm, A., Medved, J., Tkacik, T., Varga, R., Bahadur, N., Ananthakrishnan, H., and X. Liu, "A YANG Data Model for Network Topologies", I-D draft-ietf-i2rs-yang-network- topo-05, July 2016. [I-D.draft-ietf-netmod-rfc6020bis] Bjorklund, M., "The YANG 1.1 Data Modeling Language", I-D draft-ietf-netmod-rfc6020bis-14, June 2016. [RFC1195] Callon, R., "Use of OSI IS-IS for Routing in TCP/IP and Dual Environments", RFC 1195, December 1990. [RFC2178] Moy, J., "OSPF Version 2", RFC 2178, July 1997. [RFC6020] Bjorklund, M., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, October 2010. [RFC6241] Enns, R., Bjorklund, M., Schoenwaelder, J., and A. Bierman, "Network Configuration Protocol (NETCONF)", RFC 6241, June 2011. [RFC6991] Schoenwaelder, J., "Common YANG Data Types", RFC 6991, July 2013. [RFC7223] Bjorklund, M., "A YANG Data Model for Interface Management", RFC 7223, May 2014. 10.2. Informative References [I-D.draft-ietf-i2rs-usecase-reqs-summary] Hares, S. and M. Chen, "Summary of I2RS Use Case Requirements", I-D draft-ietf-i2rs-usecase-reqs-summary- 02, March 2016. [OpenDaylight] Medved, J., Varga, R., Tkacik, T., and K. Gray, "OpenDaylight: Towards a Model-Driven SDN Controller architecture", IEEE 15th Int. Symposium on World of Wireless, Mobile and Multimedia Networks (IEEE WoWMoM 2014), June 2014. Clemm, et al. Expires February 11, 2017 [Page 29] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 Authors' Addresses Alexander Clemm Cisco EMail: alex@cisco.com Jan Medved Cisco EMail: jmedved@cisco.com Robert Varga Pantheon Technologies SRO EMail: robert.varga@pantheon.sk Tony Tkacik EMail: tony.tkacik@gmail.com Xufeng Liu Ericsson EMail: xliu@kuatrotech.com Igor Bryskin Huawei EMail: Igor.Bryskin@huawei.com Aihua Guo Adva Optical EMail: aguo@advaoptical.com Hariharan Ananthakrishnan Packet Design EMail: hari@packetdesign.com Clemm, et al. Expires February 11, 2017 [Page 30] Internet-Draft draft-ietf-i2rs-yang-l3-topology-03.txt August 2016 Nitin Bahadur Bracket Computing EMail: nitin_bahadur@yahoo.com Vishnu Pavan Beeram Juniper Networks EMail: vbeeram@juniper.net Clemm, et al. Expires February 11, 2017 [Page 31]